兰斯8攻略

產品技術

Products

BUMP SERIES

您當前位置:首頁|產品技術|BUMP SERIES

 

Production Overview

Wafer-level packaging (WLP) is the technology of packaging an integrated circuit while still part of the wafer, in contrast to the more conventional method of wire bonding. WLP is essentially a true chip-scale package (CSP) technology, since the resulting package is practically of the same size as the die. 
TFME offers various leading edge wafer bumping processes. WLP is a wafer level packaging technology which uses cu pillar or solder bumps to form the interconnection between the integrated circuit (IC) and the motherboard (or Lead Frame). WLP includes wafer bumping with or without Redistribution Layer (RDL), wafer level final test, wafer singulation and device packing in tape & reel to support full turn?key solution. TFME’s Under Bump Metallurgy (UBM) over PBO or PI layers on the die active surface provides a reliable interconnect solution to meet the demands of the growing global consumer market place for portable electronics.
TFME offers customers with both 200mm and 300mm WLP Layout Design, Qualify and Mass Production services, including plated solder bump/Cu Pillar bump and ball placement technology with lead free materials.
 
Application
The WLP package family is applicable for a wide range of semiconductor device types from high end AP/PA/BB/RFIC chips, to Wireless LAN, card, switch, power management, memory, and standard analog, etc.
 
Wafer Level Features
 * 4-256 ball count
* Small body 0.64 mm2 to large 57.0 mm2 body size
* PBO, Polyimide (PI) & LCP (low curing temperature polymer) Re-passivation and Re-distribution Layer (RDL) available
* Cu Pillar. Solder bump and SAC Alloy ball-loaded bumping options
* Reliable thick Cu RDL and Cu UBM with good electrical performance
* Compatible with conventional SMT assembly and test techniques
 
Die Level Features
 * Best in package level and board level reliability
* Back-side lamination available
* Cost effective T&R packaging solutions for small ICs
* Full turnkey WLP, including probing and DPS
* Wide selection of pocket tape carrier options

Reliability Test Standards
The test criterion is zero defect out of 77 sampling units.
JEDEC Precondition MSL-1:J-STD-20/JESD22-A113
Temp/Humidity Test 85°C/ 85% RH, 1000hrs, JEDEC 22- A101
Pressure Cooker Test 121°C/ 100% RH/ 15 PSIG, 96hrs, JEDEC 22- A102
Temp Cycle Test -65 ~ 150°C, 500cycles, JEDEC22-A104
High Temp Storage Test  150°C, 1000hrs, JEDEC 22- A103  

Bumping:

?

CopyRight 2015 All Right Reserved Tongfu Microelectronics Co., Ltd.
地址:江蘇省南通市崇川路288號 電 話:0513-85058888 傳 真:0513-85058868
備案號:蘇ICP備05003519號

兰斯8攻略 时时彩一位必中口诀 内蒙古时时怎么查 APP自助领取彩金38 大乐透170彩票网 老版万人炸金花下载 中信彩票能玩吗c 九五至尊棋牌 欢乐彩票app是正规的吗 筋斗云足球直播 时时走势图网易 澳洲五分彩是官方的吗 山东时时开奖结果走势图 有人玩快三赚到钱了吗 全民炸金花可以提现金 包胆技巧选号 阿拉德之怒mg平台下载